Instructions

1. Download the Signsbeat mobile application via the respective iOS/play store

 

• Search Signsbeat on Google Play or iOS App Store to download our mobile application. 

• Make sure the Bluetooth of your mobile device is turn on.

• Allow permission for notification of your device

• Register for an account via the “Sign Up” button located at the bottom of the application and select “Partner’s Device”

Note: Please ensure that your Android version is 5.0 or later, iOS version is 10.0 or later. The ring supports Bluetooth 5.0 connection. 

 

2. Charge before use

• Please fully charge the device upon using the device for the very first time. 

• If there is a factory reset perform on the ring via the App, please place it back to it’s charging case to power it on. 

 

Simply place your device into the wireless charging case, plug in the supplied Type-C charging cable, and then plug it into a wall outlet or a USB port with a minimum of 5V 1A to begin charging. 

 

Charging Mode: The ring's green light flashes, 

Fulling Charge: Green light stays on. 

It typically takes about 2 hours to be fully charged and supports about 5-7 days for normal use. Battery life changes depending on the activated features, type, and frequency of ring use. 

 

Note: 

 

The charging case is not water resistant and is intended for indoor use only. Do not use or store it in humid environments like bathrooms, and for optimal care of it, prevent it from coming into contact with conductive materials, such as liquids, dust, metal powders and pencil leads. 

 

How to Wear Your Ring Correctly? 

 

For the best performance and accuracy, it is recommend to wear your Ring on your index finger on non-dominant hand. If you prefer another, the middle and ring fingers. can work as well. Avoid fingers where the base is narrower than the knuckle. The sensor inside of your ring should be on the palm side of your finger. The ring should fit securely and comfortably around your finger's base. 

 

3. App Operation

After activating the device, please pair it with the Signsbeat application for usage.

 

Home 

 

It gives the glance of your daily health situation: Quality of Life, Sleep, Activity, Balance (Stress), Heart Rate, SpO2. Choose to view data within 30 days.

 

Health 

View your detailed daily health data and reports: Steps, Distance, Calories, Sleep, Heart Rate, SpO2, HRV, Stress, Skin Temperature Trend, Women Health, Non-Invasive Blood Glucose Risk Assessment, and VO2 Max. 

 

Sleep 

The ring will monitor your sleep automatically and shows the detailed 

 

Heart Rate 

Start measuring from the APP manually or it will measure automatically as you set. The app will show the heart rate data and graphics. 

 

SpO2 

Start measuring from the APP manually or it will measure. automatically as you set. The app will show the SpO2 data and status of Normal or Abnormal.

 

HRV 

It will measure automatically as per the time interval you set. The app will show the value and the state of Low, Normal, High, and Excellent. 

 

Stress 

It will measure automatically as per the time interval you set. The app will show the value and the state of Calm, Moderate, Stressed, and Severe. 

 

Non-Invasive Blood Glucose Risk Assessment 

 

1. Start measuring from the APP manually. 

 

2. Follow the APP instructions to complete the info filling. 

 

3. The result of measurement would be displayed as normal or abnormal. 

 

4. Perform at least 3 days of measurements in a period of 7 days to know your diabetic risk and check the Risk. Assessment Card to help you lead a healthier lifestyle. 

 

VO2 Max 

Start measuring from the APP manually. 

You can check the value of VO2 Max and Fitness Age on the APP. 

 

Skin Temperature Trend Monitor 

It can detect your skin temperature trend and display detailed daily/weekly/monthly reports to help you better track skin temperature changes. 

 

Women Health 

 

Track the period and pregnancy cycle and the feature is only visible when the gender is set as female. 

 

About 

 

Check current device's basic information (battery level, firmware version), change the ring name and set the personal info. 

 

• Set Auto Health Monitor Interval 

The default auto health monitor Intervals are every 10 min for heart rate, every 30 min for SpO2 and every 60 min for skin temperature trend, HRV & stress. 

 

• Set Unit 

Set the unit of the skin temperature change, distance, height, and weight. 

 

• Goal Setting 

Personalize your goals for steps, distance, calories and sleep hour per day. 

 

• Firmware Update (OTA) 

Remind you if a new firmware version has been released; If so, please follow the steps to upgrade to the latest version. 

 

• Factory Reset 

After factory reset, all device data will be deleted. Please charge to reboot. 

 

Specifications 

 

Warranty: 12 months (From date of account registration) 

 

BT Version: BLE 5.0 

 

BT Range: 2 meters 

 

Battery: Rechargeable 14.5mAh - 21.5mAh depending on the ring size, Lipo battery, non-replaceable 

 

Data Memory: 15 Days 

 

Waterproof: 5ATM 

 

Activity Time: Max 99h59min 

 

Calories Burned: Max 9999.9kcal 

 

Running & Walking Distance: Max 999.99km 

 

Operating Temperature Range: -10-52 °C / 14-125 °F 

​
 

Troubleshooting 

 

If the ring doesn't pair with your smartphone 

 

1. Make sure your ring is turned on. 

 

2. Check the App to make sure Bluetooth permissions are turned on. This should be in your Bluetooth settings. 3. Check your smartphone to ensure Bluetooth is on. 4. Restart the App and try to repair the ring. 

 

If the ring isn't measuring any data 

 

Please contact our support team. 

 

If the ring battery is draining too quickly 

 

1. Calibrate your battery by charging it for at least three hours. 2. Start using your ring again as you normally would. 

 

3. Contact our support team if the problem persists. 

 

If the ring causes an allergic reaction 

 

Please stop using the device right away. In the rare event of an anaphylactic reaction, seek medical attention immediately. 

 

If the issue isn't mentioned in these tips 

 

Please contact our support team and report the issue in detail. 

 

Safety Notices

 

Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the device or other property. Read all the safety information below before using the device. 

 

Not a medical device 

 

This ring is not a medical device and should not be used as a substitute for professional medical judgment. It is not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of any condition or disease. Please consult your healthcare professional prior to making any decisions. related to your health. 

 

Use, care and maintenance 

 

Finger size can vary depending on the time of the day, and sometimes it may be difficult to remove the ring from your finger. In case the ring gets stuck: 

 

→ Use cold water and gentle soap to wet your finger, and slowly twist the ring to remove it. 

 

→ Hold your hand up above your heart until the blood pressure gets lower, and then try to remove it. 

 

→ In cases of emergency and/or discomfort, when you can't remove the ring yourself, seek immediate medical attention. 

 

Use a soft cloth or hand wash with mild soap and water to clean the ring. 

 

Your ring can be worn during showers, baths, swimming, and snorkeling. 

 

Try to avoid wearing the ring when strength training, working with a shovel or other heavy tools, or carrying heavy objects made of metal, ceramics or stone. In addition, try to avoid wearing the ring next to other rings or objects which are made of metal, ceramics, stones or diamonds. The ring may get scratched and can itself scratch softer metal jewelry or other objects in close contact with the ring like phone covers made of gold, silver, or aluminum. Some ceramic phone covers with a soft coating may also get scratched. 

 

Keep the ring away from children. This product is not intended for individuals under the age of 18. Seek immediate medical attention if you know or suspect that a child has swallowed the ring. Do not leave the ring exposed to heat, such as in a vehicle or in the sun. Do not puncture the ring or its battery. 

 

Please avoid handling batteries, or working on devices and with machinery that contain batteries while wearing your ring. In certain cases, where both the cathode and the anode of another battery touch the ring, there is a risk of a short circuit which is similar to standard metallic rings. This can result in a potentially dangerous shock. Please take the proper precautions to avoid these situations. 

 

FCC Requirement

 

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

 

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

 

-- Reorient or relocate the receiving antenna. 

 

-- Increase the separation between the equipment and receiver. 

 

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

 

-- Consult the dealer or an experienced radio/TV technician for help. 

 

FCC RF exposure statement: 

 

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure. condition without restriction.